Testbuild rev #12306
#1
Here's a new test build compiled from #12306.
With the hint of elupus I tried to activate audio pass through. It fails on my PC to create the soundbuffer but this could be due to missing hardware...
http://sourceforge.net/project/showfiles..._id=585323

So please try and report if audio pass through:
1) is working!
2) it's the same like with the older builds
3) it's even worse than before

in case of 2) and 3) pastebin a full log while playing videos with pass through enabled.
Always read the XBMC online-manual, FAQ and search the forum before posting.
Do not e-mail XBMC-Team members directly asking for support. Read/follow the forum rules.
For troubleshooting and bug reporting please make sure you read this first.
Reply
#2
thanks for the new build. but it does not work with ac3 passthrough:

15:49:53 T:3404 M:2147483647 DEBUG: CGUIInfoManager::SetCurrentSong(F:\movie\PRE0NNW1\pre0nw1-0ms.ac3)
15:49:53 T:200 M:2147483647 DEBUG: Load DialogProgress.xml: 21.09ms (1.09 ms xml load)
15:49:53 T:3176 M:2147483647 DEBUG: CDVDAudioCodecPassthrough: Synced to AC3 frame
15:49:53 T:3176 M:2147483647 NOTICE: Creating audio device with codec id: 86020, channels: 2, sample rate: 48000, pass-through
15:49:53 T:3176 M:2147483647 ERROR: CWin32DirectSound::CWin32DirectSound - CreateSoundBuffer failed with error code -2005401570
15:49:53 T:3176 M:2147483647 ERROR: CThread:ConfusedtaticThread : Access violation at 0x00418fbd: Reading location 0x00000000
15:49:53 T:3176 M:2147483647 NOTICE: Closing audio device
15:49:53 T:3176 M:2147483647 ERROR: CThread:ConfusedtaticThread : Access violation at 0x00418eb2: Reading location 0x00000000
15:49:53 T:3176 M:2147483647 DEBUG: CThread:ConfusedtaticThread, deleting thread graphic context
15:49:53 T:3176 M:2147483647 DEBUG: Thread 3176 terminating
15:49:53 T:3404 M:2147483647 DEBUG: Loading additional tag info for file F:\movie\PRE0NNW1\pre0nw1-0ms.ac3
15:49:53 T:3404 M:2147483647 DEBUG: Alloc resources: 4.88ms (0.00 ms skin load, 0.27 ms preload)
15:49:56 T:3812 M:2147483647 DEBUG: Alloc resources: 22.37ms (0.00 ms skin load, 0.20 ms preload)
15:50:01 T:3404 M:2147483647 NOTICE: Storing total System Uptime
15:50:01 T:3404 M:2147483647 NOTICE: Saving settings
Reply
#3
It doesn't have any sound but I wouldn't say it's worse than before because the video does run at the right speed this time but then freezes after about 5 seconds. I think it's a step in the right direction.

http://pastebin.com/m1fd97c4f
Reply
#4
Shows more or less the same error than on my platform without any digital hw. Maybe something with the initialization params...
Always read the XBMC online-manual, FAQ and search the forum before posting.
Do not e-mail XBMC-Team members directly asking for support. Read/follow the forum rules.
For troubleshooting and bug reporting please make sure you read this first.
Reply
#5
This release fixed some of my issue with analog audio Smile

DTS is now working when set to analog! Thanks
Reply
#6
playes files properly in analog output now, but digital output it hangs after 5-7 sec and it runs at normal speed now instead of the 2x before.

00:28:59 T:3704 M:2423484416 NOTICE: Creating audio device with codec id: 86020, channels: 2, sample rate: 48000, pass-through
00:28:59 T:3704 M:2423328768 ERROR: CWin32DirectSound::CWin32DirectSound - CreateSoundBuffer failed with error code -2147467263
00:28:59 T:3704 M:2423226368 ERROR: CThread:ConfusedtaticThread : Access violation at 0x00418fbd: Reading location 0x00000000
00:28:59 T:3704 M:2423128064 NOTICE: Closing audio device
Reply
#7
Should all the media scrapers work with these windows builds? I am having a heck of a time getting my TV shows to scrape properly. I am getting all the info except for the episodes. It always shows 0 episodes.
Reply
#8
Looks like I have the same problem as a lot here. It plays for about 5 seconds then freezes, no sound even for that short bit.


here is the whole log
http://pastebin.com/f2483e6cc

I'm guessing this is the part that matters


02:23:43 T:1052 M:1312399360 DEBUG: CDVDAudioCodecPassthrough: Synced to AC3 frame
02:23:43 T:1052 M:1312399360 NOTICE: Creating audio device with codec id: 86020, channels: 2, sample rate: 48000, pass-through
02:23:43 T:1052 M:1312391168 ERROR: CWin32DirectSound::CWin32DirectSound - CreateSoundBuffer failed with error code -2147467263
02:23:43 T:1052 M:1312382976 ERROR: CThread:ConfusedtaticThread : Access violation at 0x00418fbd: Reading location 0x00000000
02:23:43 T:1052 M:1312382976 NOTICE: Closing audio device
02:23:43 T:1052 M:1312382976 ERROR: CThread:ConfusedtaticThread : Access violation at 0x00418eb2: Reading location 0x00000000
02:23:43 T:1052 M:1312382976 DEBUG: CThread:ConfusedtaticThread, deleting thread graphic context
02:23:43 T:1052 M:1312382976 DEBUG: Thread 1052 terminating
Reply
#9
analogue audio problems fixed, i.e. i dont get noice on ac3 or dd outputting to my 2.1 computer speaker system. BUT my video black screen problem still remains alas Sad
Reply
#10
Curious that some getting the return code DSERR_INVALIDCALL like me the others DSERR_UNSUPPORTED assuming you all have a sound card with digital output.
Have to see if I can get such a card somewhere.
Always read the XBMC online-manual, FAQ and search the forum before posting.
Do not e-mail XBMC-Team members directly asking for support. Read/follow the forum rules.
For troubleshooting and bug reporting please make sure you read this first.
Reply
#11
Guys skip and replay functions in music is not working yet and pause too.
Reply

Logout Mark Read Team Forum Stats Members Help
Testbuild rev #123060